Study on lithium-ion secondary battery separator prepared by graft polymerization of GMA onto PVDF powder under pre- irradiation
|更新时间:2023-03-27
|
Study on lithium-ion secondary battery separator prepared by graft polymerization of GMA onto PVDF powder under pre- irradiation
Journal of Radiation Research and Radiation ProcessingVol. 29, Issue 5, Pages: 266-270(2011)
作者机构:
1.中国科学院上海应用物理研究所 上海 201800
作者简介:
基金信息:
DOI:
CLC:
扫 描 看 全 文
YUAN Hongming, LI Jihao, YU Yang, et al. Study on lithium-ion secondary battery separator prepared by graft polymerization of GMA onto PVDF powder under pre- irradiation. [J]. Journal of Radiation Research and Radiation Processing 29(5):266-270(2011)
DOI:
YUAN Hongming, LI Jihao, YU Yang, et al. Study on lithium-ion secondary battery separator prepared by graft polymerization of GMA onto PVDF powder under pre- irradiation. [J]. Journal of Radiation Research and Radiation Processing 29(5):266-270(2011)DOI:
Study on lithium-ion secondary battery separator prepared by graft polymerization of GMA onto PVDF powder under pre- irradiation
PVDF-g-PGMA powder was prepared by pre-irradiation graft polymerization technique and then the membranes were cast from PVDF-g-PGMA powder with different degrees of grafting (DG) using solvent evaporation method. The structure and the performance both of the PVDF and the PVDF-g-PGMA membranes were analyzed by means of Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), mercury porosimetry and lithium ion conductivity, respectively. After assembling 2032 coin type cell, the battery performances were also investigated. The results demonstrate that the PVDF-g-PGMA membranes possess better cell performance than pristine PVDF membrane.
关键词
锂离子电池隔膜聚偏氟乙烯聚甲基丙烯酸缩水甘油酯预辐照接枝
Keywords
Lithium ion battery separatorPVDF-g-PGMAPre-irradiation graft polymerization