Studies on curing mechanism of polycarbosilane precursor fibers irradiated by γ-rays below gelling dose
|更新时间:2023-03-30
|
Studies on curing mechanism of polycarbosilane precursor fibers irradiated by γ-rays below gelling dose
Journal of Radiation Research and Radiation ProcessingVol. 26, Issue 3, Pages: 146-150(2008)
作者机构:
1.中国工程物理研究院核物理与化学研究所 绵阳 621900
2.西南科技大学材料科学与工程学院 绵阳 621010
作者简介:
基金信息:
DOI:
CLC:
扫 描 看 全 文
LI Yang, XU Yunshu. Studies on curing mechanism of polycarbosilane precursor fibers irradiated by γ-rays below gelling dose. [J]. Journal of Radiation Research and Radiation Processing 26(3):146-150(2008)
DOI:
LI Yang, XU Yunshu. Studies on curing mechanism of polycarbosilane precursor fibers irradiated by γ-rays below gelling dose. [J]. Journal of Radiation Research and Radiation Processing 26(3):146-150(2008)DOI:
Studies on curing mechanism of polycarbosilane precursor fibers irradiated by γ-rays below gelling dose
Polycarbosilane (PCS) precursor fibers were irradiated by γ-rays in air. The structure and the subsequent pyrolysis reaction of PCS fibers irradiated below gelling dose were investigated. Results show that a little of oxygen is imported to form the structures of Si-O-Si、Si-OH and C=O from Si-H and Si-CH,3, of PCS in irradiation process. And gelatinized products formed from the Si-O-Si and Si-C-Si bridge structures obviously increase with the heat treatment temperature. It has been also found that the initial pyrolysis temperature of irradiated PCS fibers increases from 320℃ to 600℃, and the ceramic yields increase from 57.5% to about 83%. All the samples of PCS precursor fibers irradiated below gelling dos and under the condition with a little of oxygen can be pyrolyzed into SiC ceramic fibers with intact microstructure.