
1.化工部晨光化工研究院
扫 描 看 全 文
张石玉, 罗腊生, 张世枚. 聚丙烯辐射效应的研究[J]. 辐射研究与辐射工艺学报, 1985,3(1):48-53.
Zhang Shiyu, Luo Lasheng, Zhang Shimei. THE STUDIES ON RADIATION EFFECT OF ISOTACTIC POLYPROPYLENE[J]. Journal of Radiation Research and Radiation Processing, 1985,3(1):48-53.
本文研究了在不同温度下和不同介质存在时,γ射线对等规立构聚丙烯的性能与结构的影响。实验结果表明,聚丙烯的特性粘度随剂量的增加而减少,而且初始下降相当大。当在室温下空气中辐照时,聚丙烯的裂解稍占优势;真空中辐照时则能使聚丙烯的交联效率增加。若提高辐照温度,聚丙烯的凝胶点则向高剂量方向移动,在180℃下真空辐照的聚丙烯就不再产生凝胶了。X射线和红外光谱测定结果指出,聚丙烯的结晶度和等规度随辐照温度的增加而迅速下降。
The effects of γ-radiation on the properties and structures of isotactic polypropylene have been investigated in different medium and at different temperature.,The results showed that the intrinsic viscosity of polypropylene decreased with the increase of dose, and initial decrease in the intrinsic, viscosity is considerable. When the polypropylene irrradiated in air at room temperature, the degradation of polypropylene is predominate. The efficiency of cross-linking of polypropylene increased by irradiation in vacuum. When the temperature increased during irradiation, the gel point of polypropylene moved up to higher dose. Polypropylene irradiated in vacuum at 180℃ does not produce gel.,It was found by the X-analysis and infrared spectrum measurement that the degree of crystallinity and tacticity of polypropylene decreased remarkably with increasing temperature during irradiation.
等规立构聚丙烯交联裂解聚丙烯的性能与结构γ射线辐照
Isotactic polypropyleneCross-linkingDegradationProperties and structures of polypropyleneγ-irradiation
0
浏览量
0
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621