Studies on the effects of EPDM, SR on PTC- of HDPE/CB before and after γ-radiation

JIA Shaojin; XU Zhongting; ZHANG Zhicheng; JIANG Pingkai; XIU Qihui; WANG Zongguang

您当前的位置：

首页 >

文章列表页 >

Studies on the effects of EPDM, SR on PTC- of HDPE/CB before and after γ-radiation

更新时间：2023-03-30

- Studies on the effects of EPDM, SR on PTC- of HDPE/CB before and after γ-radiation
- Journal of Radiation Research and Radiation Processing Vol. 22, Issue 6, Pages: 329-333(2004)
- 作者机构：
  
  1.上海交通大学化学化工学院高分子科学与工程系　上海　200240
  2.芜湖佳宏新材料有限公司　芜湖　241000
  3.中国科学技术大学高分子科学与工程系　合肥　230026
- 作者简介：
- 基金信息：
- DOI：
  CLC：
扫描看全文
JIA Shaojin, XU Zhongting, ZHANG Zhicheng, et al. Studies on the effects of EPDM, SR on PTC- of HDPE/CB before and after γ-radiation. [J]. Journal of Radiation Research and Radiation Processing 22(6):329-333(2004)
DOI：

JIA Shaojin, XU Zhongting, ZHANG Zhicheng, et al. Studies on the effects of EPDM, SR on PTC- of HDPE/CB before and after γ-radiation. [J]. Journal of Radiation Research and Radiation Processing 22(6):329-333(2004) DOI：

摘要

对掺杂了导电碳黑（CB）的高密度聚乙烯（HDPE）/三元乙丙橡胶（EPDM）和HDPE/EPDM/Si rubber（硅橡胶）的挤出样品进行了辐照前后的电性能表征。研究了正温度系数（PTC）功能材料挤出后的特性，发现挤出后粒子和聚合物取向对材料电性能都有较大影响。经γ射线辐照后HDPE/EPDM/Si rubber/CB功能复合材料稳定性大为提高，初步探讨了辐射对PTC功能材料稳定性的影响。加入硅橡胶，可增强CB粒子与基体的亲和力，增加粒子的分散性，提高电阻的长期稳定性，并使工作温度得以长期保持。

Abstract

High-density-polyethylene (HDPE), Si rubber (SR) and ethylene-density-polyethylene (EPDM) were used as the polymer matrices, A kinds of carbon blacks was used as the conductive filler. The positive temperature coefficient (PTC) intensity of the HDPE/CB, HDPE/EPDM /CB composites flow during extrusion to produced was tested before and after irradiation. Compared to that of HDPE/CB composites, the electrical reproducibility of the irradiated HDPE/EPDM /CB composites of is better. The effects of γ-rays irradiation were also estimated. The results showed that the reproductive of the PTC effect was related to the adhesion between the interface of the polymer matrices and CB particles. These PTC phenomena and their distinctive aspects were described. The explanations were given from the structural characteristics of the blends, CB particles distribution and motion of polymer segments.

关键词

高密度聚乙烯负温度系数正温度系数硅橡胶炭黑

Keywords

High-density-polyethylene (HDPE)Negative temperature coefficient (NTC)Positive temperature coefficient (PTC) intensitySi RubberCarbon black

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Rheological properties of low concentration CB filled HDPE composites and its response to radiation

Preparation of non-hologen flame retardant POE/EPDM/SR/MH insulation materials

RESEARCH AND DEVELOPMENT OF RADIATION CROSSLINKING INFLUENCE ON POLYMER/CARBON BLACK CONDUCTIVE COMPOSITES

INFLUENCE OF RADIATION CROSSLINKING ON THE STABILITY OF PTC EFFECT OF LDPE/CB COMPOSITES

RESEARCH ON MATERIAL OF HIGH TEMPERATURE CABLE AND WIRE INSULATION BY γ-RAYS

Related Author

No data

Related Institution

Yellow River Conservancy Technical Institute

College of Chemistry and Chemical Engineering, Henan University

Shanghai Institute of Applied Physics, Chinese Academy of Science

College of Environment and Chemical Engineering, Shanghai University

Shanghai key lab of Electric Insulation and Thermal Aging, Shanghai Jiao Tong University

⁰